ISO 8299:2019
مواصفة قياسية دولية
الإصدار الحالي
·
اعتمدت بتاريخ
30 يناير 2019
·
Nuclear fuel technology — Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry
ملفات الوثيقة ISO 8299:2019
الإنجليزية
25 صفحات
الإصدار الحالي
56.75 OMR
مجال الوثيقة ISO 8299:2019
This document specifies a method for the determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry.
The method applies to uranium and plutonium isotope composition and concentration measurement of irradiated Magnox and light water reactor fuels (boiling water reactor or pressurized water reactor), in final products at spent-fuel reprocessing plants, and in feed and products of MOX and uranium fuel fabrication. The method is applicable to other fuels, but the chemical separation and spike solution are, if necessary, adapted to suit each type of fuel.
الأكثر مبيعاً
GSO 150-2:2013
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني :
فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني :
فترات الصلاحية الاختيارية
OS GSO 150-1:2013
GSO 150-1:2013
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية
GSO 150-1:2013
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية
اعتمدت مؤخراً
ISO 12224-1:2024
مواصفة قياسية دولية
Solder wire, solid and flux-cored — Specification and test methods — Part 1: Classification and performance requirements
ISO 33405:2024
مواصفة قياسية دولية
Reference materials — Approaches for characterization and assessment of homogeneity and stability
ISO 33406:2024
مواصفة قياسية دولية
Approaches for the production of reference materials with qualitative properties
ISO 12224-2:2024
مواصفة قياسية دولية
Solder wire, solid and flux-cored — Specification and test methods — Part 2: Determination of flux content